Model 3: Landy 4×4 Pickup

Legend is here! This model brings these features:

  • realistic body details, embossed into the part surface
  • detailed interior
  • selected parts are ready for multicolor printing by filament change

 

Landy 4×4 Pickup is 3d printable set of parts for your 3d printer. The model is approx. 45 cm long (1:8 scale) and is ready for your RC equipment.

  • 13 days
  • 20x20x20
  • 245 pcs
  • 2,5 kg
  • PLA
  • PC Blend/ASA
  • soldering
  • no glue
New version 11. 4. 2022

Model 3 v1.4.1

  • BeltDrive - Box Front D - fix for missing Hinge Hole

Price:$40.00

3D Sets BeltDrive 4x4

Durable, simple, and quiet - thanks to timing belts.

Opened Differentials

Can be combined with locked axles for optimal performance.

Easy update

You can update to other Landy variants.

Easy repaired

You can print new parts and easy repaired.

RC car from 3D Sets

  • RC car from 3D Sets

  • Generation 2.0 Drivetrain

  • 3D Set Landy Pickup Testfahrt

  • Lets Build This 3D Printed RC Landy

Product Details

 

Easy to Assemble

To build the model you only need some basic tools such as a screwdriver, a sharp knife, soldering iron and most importantly – a good mood.

Cheap and fast repairs

Did you break something? Don’t worry, you’ll have a reprinted spare part in no time. Then loosen a few screws and replace the damaged parts. And – drive again immediately!

3d print maximum, buy minimum

“Don’t buy parts – just print them, nearly all!” You print most parts starting with bodywork, complete chassis and even cardan joints and gearbox. Buy just motor, radio control electronics, tires and shocks/springs – and you are ready for ride.

Step-by-step User Guide

Comprehensive Build Guide is available for free to anyone – lets go through before you buy the model. Build Guide include a complete bill of materials and links for online stores, when you can purchase non-printable parts.

“Build when you print” – you get not only the ready-made print plates but also the time-effective print sequence, so you can continue assembling while you printing and do not need to wait for the part you need.

Build Guide available here
List of non-printable parts is here

What 3d print data I will get?

You don’t get the usual clutter of .stl parts, we prepared:

  • gcodes compatible with Original Prusa MK3 printers
  • printing assemblies in .3mf files (can be opened in Prusa Slicer, Cura, Simplify 3D)
  • standalone parts in .stl files

If you have Original Prusa MK3, you can print right from the gcodes, if you have another printer, just load .3mf files in slicing software and generate you own gcode. Or make put together parts you wish using common .stl files.

What you will need:

  • any 20 x 20 cm 3D printer, Prusa i3 recommended
  • 2,5kg of filament needed to all parts, PLA or PET. Preferably 1,75 kg of black and 0,75 kg of any colour (body of the car).
  • bring your own motor/speed controller, servo and battery
  • basic soldering equipment
  • screws and nuts
  • set of bearings
  • set of rubber tires and shocks

Model 3: Landy 4×4 Pickup – Changelog

New version 11. 4. 2022

Model 3 v1.4.1

  • BeltDrive - Box Front D - fix for missing Hinge Hole
New version 6. 4. 2022

Model 3 v1.4.0

  • New BeltDrive 4x4 - silent & reliable, because it uses timing belts. Designed for brushless motors only.
  • Front & Rear Axle - opened differential - now you can 3d print and build real differentials, which can be combined with locked axles too. You can make a specific setup that fits your needs.
  • New Cardan joints - snap-on design without tiny screws gives smooth operation and reliability.
  • 3-link suspension - allows better kinematics and smoother movements of the body.
New version 20. 11. 2020

Model 3 v1.3.1

  • Gearbox Housing update
  • Drive Shaft - Differential side - length correction
New version 12. 10. 2020

Model 3 v1.3

  • new Axles with more durable differentials
  • optional wider track (files located in the Spare Parts folder)
  • added TrackBar to rear Axle, preventing wobble

2 reviews for Model 3: Landy 4×4 Pickup

Only logged in customers who have purchased this product may leave a review.

2 reviews for Model 3: Landy 4×4 Pickup

  1. kyano.hellinx (verified owner)

    I mean it looks great u have a lot of choice, they help well. I had some problems going through the build. But everything turned out great.

  2. Matthew Bunn (verified owner)

    When I come across this website it was the deciding reason for me to buy a 3d printer (now I have two). The landy is very well designed, supports pre done,
    And cleverly arranged on the build plate to get the best print. Everything went well together, but had to drill out the grill to clear the sidelights with a 9.5mm bit.
    You will need a well tuned printer or a Prusa, plus good quality PLA filament. To build this. Ive Had so much fun building it.

3D Sets Accessories