Model 2: Rancher 4×4 Hardtop

1100+
5
Model 2 v1.4.1

Price:$35.00

Rancher 4×4 Hardtop – 3d print and build your own scale crawler.

The model measures approximately 53 cm in length at a 1:8 scale and is ready to be outfitted with your own RC equipment. It is suitable for use both indoors and outdoors.

This set includes 3D printable parts for your 3D printer, however, non-printable components such as screws and electronics must be purchased separately. Links to purchase these parts are included in the Build Guide.

Read More
  • Printing time
    15 days
  • Bed size
    20x20x20
  • Parts
    163 pcs
  • Weight
    2,6 kg
  • Material
    PLA
  • Material
    PC Blend/ASA
  • Soldering
    yes
  • Glueing
    no glue

Model 2: Rancher 4×4 Hardtop Accessories

New version 11. 4. 2022

Model 2 v1.4.1

  • BeltDrive - Box Front D - fix for missing Hinge Hole

3D Sets BeltDrive 4x4

Durable, simple, and quiet - thanks to timing belts.

Opened Differentials

Can be combined with locked axles for optimal performance.

Easy upgrade

You can update to another Rancher variant.

Easy repaired

You can print new parts and easy repaired.

Rancher review by RC Printer

  • Rancher review by RC Printer

  • Generation 2.0 Drivetrain

  • Winter with Rancher

  • 3D print your own

Technical Specification

 

Easy to Assemble

To build the model you only need some basic tools such as a screwdriver, a sharp knife, soldering iron and most importantly – a good mood.

Cheap and fast repairs

Did you break something? Don’t worry, you’ll have a reprinted spare part in no time. Then loosen a few screws and replace the damaged parts. And – drive again immediately!

3d print maximum, buy minimum

“Don’t buy parts – just print them, nearly all!” You print most parts starting with bodywork, complete chassis and even cardan joints and gearbox. Buy just motor, radio control electronics, tires and shocks/springs – and you are ready for ride.

Step-by-step User Guide

Comprehensive Build Guide is available for free to anyone – lets go through before you buy the model. Build Guide include a complete bill of materials and links for online stores, when you can purchase non-printable parts.

“Build when you print” – you get not only the ready-made print plates but also the time-effective print sequence, so you can continue assembling while you printing and do not need to wait for the part you need.

Build Guide available here
List of non-printable parts is here

What 3d print data I will get?

You don’t get the usual clutter of .stl parts, we prepared:

  • gcodes compatible with Original Prusa MK3 printers
  • printing assemblies in .3mf files (can be opened in Prusa Slicer, Cura, Simplify 3D)
  • standalone parts in .stl files

If you have Original Prusa MK3, you can print right from the gcodes, if you have another printer, just load .3mf files in slicing software and generate you own gcode. Or make put together parts you wish using common .stl files.

What you will need:

  • any 20 x 20 cm 3D printer, Prusa i3 recommended
  • 2,75 kg of filament needed for all parts, PLA or PET. Preferably 2 kg of black and 0,75 of any color (body of the car)
  • bring your own motor/speed controller, servo and battery
  • basic soldering equipment
  • screws and nuts
  • set of bearings
  • set of rubber tires and shocks

Model 2: Rancher 4×4 Hardtop – Changelog

New version 11. 4. 2022

Model 2 v1.4.1

  • BeltDrive - Box Front D - fix for missing Hinge Hole
New version 6. 4. 2022

Model 2 v1.4.0

  • New BeltDrive 4x4 - silent & reliable, because it uses timing belts. Designed for brushless motors only.
  • Front & Rear Axle - opened differential - now you can 3d print and build real differentials, which can be combined with locked axles too. You can make a specific setup that fits your needs.
  • New Cardan joints - snap-on design without tiny screws gives smooth operation and reliability.
  • 3-link suspension - allows better kinematics and smoother movements of the body.
New version 20. 11. 2020

Model 2 v1.3.2

  • Gearbox Housing update
New version 14. 10. 2020

Model 2 v1.3.1

  • error resolved in “Interior 1” (new seats) printing setups (.gcode, .3mf, printing plates in .stl format).
New version 29. 9. 2020

Model 2 v1.3

  • new Axles with more durable differentials
  • optional wider track (files located in the Spare Parts folder)
  • new seats with realistic shape
  • new door interior panels with realistic shape
  • new electronics box, now easily accessible
  • added TrackBar to rear Axle, preventing wobble

2 reviews for Model 2: Rancher 4×4 Hardtop

Only logged in customers who have purchased this product may leave a review.

2 reviews for Model 2: Rancher 4×4 Hardtop

  1. vcreis (verified owner)

    5* Qualidade excelente. Acho fantástico que ao fim destes anos todos ainda melhoram os modelos. Obrigado e continuem o bom trabalho.

  2. skip317skip (verified owner)

    These models are absolutely amazing! These models come with easy to use instructions and the craftsmanship, detail, and quality of the parts is mind blowing. Looking forward to printing my next model!