Easy to Assemble
To build the model you only need some basic tools such as a screwdriver, a sharp knife, soldering iron and most importantly – a good mood.
Cheap and fast repairs
Did you break something? Don’t worry, you’ll have a reprinted spare part in no time. Then loosen a few screws and replace the damaged parts. And – drive again immediately!
3d print maximum, buy minimum
“Don’t buy parts – just print them, nearly all!” You print most parts starting with bodywork, complete chassis and even cardan joints and gearbox. Buy just motor, radio control electronics, tires and shocks/springs – and you are ready for ride.
Step-by-step User Guide
Comprehensive Build Guide is available for free to anyone – lets go through before you buy the model. Build Guide include a complete bill of materials and links for online stores, when you can purchase non-printable parts.
“Build when you print” – you get not only the ready-made print plates but also the time-effective print sequence, so you can continue assembling while you printing and do not need to wait for the part you need.
Build Guide available here
List of non-printable parts is here
- 3D Sets BeltDrive – the transmission solution is durable, simple, and quiet because it uses timing belts.
- Differential – 3D Sets developed unique design of opened differential for best on-road capabilities. The differential is integrated right into the BeltDrive pulley and its special design doesn’t require any metal shafts or other tiny parts – everything is done using standard bearings, used in every 3D Sets model.
- HD Surface Details – this technique is used for incredibly fine surface structures of the seats.
- Easy maintenance – the front and rear axles are attached with just a few screws and can be very easily removed from the model. An integral part of the rear axle is the transmission with engine and ESC – the entire drive system can be removed from the body in one movement.
- Easy-to-disassemble – Metal nuts are now embedded for repeatedly disassembled or stressed joints. Removing the axles is now much more convenient.
- Double Wishbone suspension – independently suspended front axle wheels with sophisticated wheel geometry. The axle is designed to work with 50-65 mm long shocks with short travel. The axle uses a system of fully printed 3D Sets ball joints and is optimized for higher impact resistance.
- Highly detailed model of the engine – the engine covers the moving parts of the gearbox and it is possible to experiment with color by changing the filament during printing.
- Innovative battery box with easy opening with rotary locks, easily accessible from the bottom of the model.
- Many new details – e.g. realistic emboss on the inner parts of bodywork, interior trims, fuel tank in the trunk, and more.
What you get:
- 3d printing files: .stl and .gcode optimised for Prusa Mk2-3 and Prusa Mini printers, .stl for regular 3d printer with 20×20 cm bed size. The total download size is over 365 MB. Total printing time is about 10,5 days of continuous printing.
- step-by-step build guide, available here
- list of all non-printable items (like motor, tires, screws, etc.) with link to recommended online stores
What you will need:
- any 18 x 18 cm (or bigger) 3D printer, Prusa i3 recommended
- 1.9 kg of PLA filament is needed for all parts, PC Blend for some specific parts.
- bring your own motor/speed controller, servo, and battery
- screws and nuts
- set of bearings
- set of rubber tires and shocks
How I get the purchased files?
- after purchasing this digital product, you can download the printing files under “My Account” (in the “Downloads” section)
delboy2104 (verified owner) –
I was not expecting this model to turn out so well. It fitted together very well and looks fantastic. I now have the hard task of deciding which model to make next . You have a very happy customer !