Model 5: Landy 4×4 Wagon

880+
5
Model 5 v1.2.1

Price:$45.00

One of our biggest models is here! Landy 4×4 Wagon brings these features:

  • XXL size – 54 cm long!
  • realistic body details, embossed into the surfaces of the parts
  • detailed interior

The model measures approximately 54 cm in length at a 1:8 scale and is ready to be outfitted with your own RC equipment. It is suitable for use both indoors and outdoors.

This set includes 3D printable parts for your 3D printer, however, non-printable components such as screws and electronics must be purchased separately. Links to purchase these parts are included in the Build Guide.

Read More
  • Printing time
    18,5 days
  • Bed size
    20x20x20
  • Parts
    198 pcs
  • Weight
    3,5 kg
  • Material
    PLA
  • Material
    PC Blend/ASA
  • Soldering
    yes
  • Glueing
    required

Model 5: Landy 4×4 Wagon Accessories

New version 11. 4. 2022

Model 5 v1.2.1

  • BeltDrive - Box Front D - fix for missing Hinge Hole

3D Sets BeltDrive 4x4

Durable, simple, and quiet - thanks to timing belts.

Opened Differentials

Can be combined with locked axles for optimal performance.

Easy repaired

You can print new parts and easy repaired.

Landy Wagon Quick Snow Bash

  • Landy Wagon Quick Snow Bash

  • Generation 2.0 Drivetrain

  • 3D Sets Model 5 Landy 4x4 Wagon Fully 3d printed 1/8 Scale 4WD

Product Details

 

Easy to Assemble

To build the model you only need some basic tools such as a screwdriver, a sharp knife, soldering iron and most importantly – a good mood.

Cheap and fast repairs

Did you break something? Don’t worry, you’ll have a reprinted spare part in no time. Then loosen a few screws and replace the damaged parts. And – drive again immediately!

3d print maximum, buy minimum

“Don’t buy parts – just print them, nearly all!” You print most parts starting with bodywork, complete chassis and even cardan joints and gearbox. Buy just motor, radio control electronics, tires and shocks/springs – and you are ready for ride.

Step-by-step User Guide

Comprehensive Build Guide is available for free to anyone – lets go through before you buy the model. Build Guide include a complete bill of materials and links for online stores, when you can purchase non-printable parts.

“Build when you print” – you get not only the ready-made print plates but also the time-effective print sequence, so you can continue assembling while you printing and do not need to wait for the part you need.

Build Guide available here
List of non-printable parts is here

What 3d print data I will get?

You don’t get the usual clutter of .stl parts, we prepared:

  • gcodes compatible with Original Prusa MK3 printers
  • printing assemblies in .3mf files (can be opened in Prusa Slicer, Cura, Simplify 3D)
  • standalone parts in .stl files

If you have Original Prusa MK3, you can print right from the gcodes, if you have another printer, just load .3mf files in slicing software and generate you own gcode. Or make put together parts you wish using common .stl files.

What you will need:

  • any 20 x 20 cm 3D printer, Prusa i3 recommended
  • 3,5 kg of filament needed to all parts, PLA or PET. Preferably 2,5 kg of black and  kg of any colour (body of the car).
  • bring your own motor/speed controller, servo and battery
  • basic soldering equipment
  • screws and nuts
  • set of bearings
  • set of rubber tires and shocks

Technical Specification

Model 5: Landy 4×4 Wagon – Changelog

New version 11. 4. 2022

Model 5 v1.2.1

  • BeltDrive - Box Front D - fix for missing Hinge Hole
New version 7. 4. 2022

Model 5 v 1.2.0

  • New BeltDrive 4x4 - silent & reliable, because it uses timing belts. Designed for brushless motors only.
  • Front & Rear Axle - opened differential - now you can 3d print and build real differentials, which can be combined with locked axles too. You can make a specific setup that fits your needs.
  • New Cardan joints - snap-on design without tiny screws gives smooth operation and reliability.
  • 3-link suspension - allows better kinematics and smoother movements of the body.
New version 20. 11. 2020

Model 5 v1.1.1

  • Gearbox Housing update
New version 12. 10. 2020

Model 5 v1.1

  • new Axles with more durable differentials
  • optional wider track (files located in the Spare Parts folder)
  • added TrackBar to rear Axle, preventing wobble

2 reviews for Model 5: Landy 4×4 Wagon

Only logged in customers who have purchased this product may leave a review.

2 reviews for Model 5: Landy 4×4 Wagon

  1. Kimberly Alger (verified owner)

    THIS THING IS GREAT!!! I thought this truck’s size would be between a 1/12th and 1/10th size, but this thing is bigger than most 1/10th scale crawlers I’ve seen. Where I live, I am not able to order from AliExpress, so I ordered all of my screws and bearings from rcprinter.com and I highly recommend their kits. The truck drives great and handles better than some notable RC crawlers. Even though they shocked us all with 3d printed ball joints, they do not work as well as metal ones and they are a pain to install.

    Will definitely order one soon.

  2. Yevgeniy Valeyev (verified owner)

    Great project, had lots of fun building this car with my son! Broke it a couple of times, really cool that you can print the replacement parts and fix it, there’s also a great community.

    Working on a second one – pickup. 🙂